Electric Remote Control Vertical Blind - 遙控電動垂直簾

Electric Remote Control Vertical Blind - 遙控電動垂直簾

Motor Installation

1. Plug the motor into the big end bracket with 45°.
2. The fingers should press the button and turn the motor to a right angle.
3. You will hear the sound click from the button.
4. Make sure the button MUST fully grip the motor securely.
5. One terminal of connection cable should be connected the motor, and other terminal should be connected the control board.

Connection of Power Supply for the System

1. Plug the adaptor to the power socket.
2. Insert the connector of the adapter to the socket of the motor.

Specification of Wall Mount Control Board (Infrared Receiver)

1. Press the buttons on the wall mount control board may control the blind opening or closing directly.
2.   button controls the blind closing.
3.   button controls the blind opening.
4. When the blind fully closed or opened it will stop automatically.
5.   button controls the blind to turn left.
6.   button controls the blind to turn right.
7. When the blind are fully turned left or right, it will stop automatically.
8. You may turn the micro adjuster by a small screwdriver to modulate the strength of the motor. A ⊕ for closing and opening of the blind, and B ⊕ for left turning and right turning.
9. Turn to clock-wise of the micro adjuster to add the strength of the motor, and turn to counter-clockwise to reduce the strength of the motor.

Specification of Remote Controller

1. 3 pieces of AAA batteries should place in the compartment of the remote controller. Notice the polarity.
2. You are able to press the buttons of the remote controller to control the closing or opening of the blind.
3. and   buttons control the closing and opening of the blind.
4.  and  buttons control the blind to turn left and right.