Electric Remote Control Roller Blind System - 遙控電動卷簾機

Electric Remote Control Roller Blind - 遙控電動卷簾機

Operation Instructions:
Usually upward and downward limited positions of the blind were presetted by factory. You may reset these positions as the following steps.

1. is a button of moving down and stop.
2. is a button of moving up and stop.
3. The setting of downward limited and upward limited positions are as: 
   a. You MUST set the downward limited position first. 
   b. Press the SET button for 6 seconds till the red light flush and release the button. 
   c. Click the button, the blind will go down till to the desired downward limited position and click the same button again to stop the blind. 
   d. Click the CONFIRM button to confirm the downward limited position. 
   e. Click the   button, the blind will go up till to the desired upward limited position and click the same button again to stop the blind. 
   f. Click the CONFIRM button to confirm the upward limited position. The red light will change to green light and stop to flush. The setting is completed now.
4. You can click the or   button, the blind will go down or up to your desire position within you presetted downward and upward limited position, please keep trying.
5. Small button of R ● & S ● are changed the current. The meaning is changed the rolling direction of the blind.
6. Use a small stick to press the button R ● for few seconds till to red light flush and then press button S ● till to the  red light changed to green light. This setting is completed.